Part Number Hot Search : 
HPL15PT 012GN01 SK402 CXA700 BUS14 PE43702 PCA95 SS2200
Product Description
Full Text Search
 

To Download LQ200T3LZ18 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  www..net www..net
www..net www..net
ld-17x11-1 1. application this specification applies to the color 20.0? wide xga tft-lcd module LQ200T3LZ18. * these specification sheets are proprietary products of sharp corporation (?sharp?) and include materials protected under copyright of sharp. do not reproduce or cau se any third party to reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of sharp. * in case of using the device for applicat ions such as control and safety equipm ent for transportation (aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into consideration that approp riate measures such as fail-safe functions and redundant system design should be taken. * do not use the device for equipment that requires an extr eme level of reliability, such as aerospace applications, telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment for life support. * sharp assumes no responsibility for any damage resulting from the use of the device that does not comply with the instructions and the precautions specified in these specification sheets. * contact and consult with a sharp sales representative for any questions about this device. 2. overview this module is a color active matrix lcd module incorporating amorphous silicon tft (t hin f ilm t ransistor). it is composed of a color tft-lcd panel, driver ics, control circuit, power supply circuit, inverter circuit and back light system etc. graphics and texts can be displayed on a 1366  rgb  768 dots panel with 16,777,216 colors by using lvds (l ow v oltage d ifferential s ignaling) to interface, +12v of dc su pply voltages and supply voltage for back lights. this module also includes the dc/ac inverter to drive the ccft. (+24v of dc supply voltage) 3. mechanical specifications parameter specifications unit 50.89  diagonal  cm display size 20.04  diagonal  inch active area 443.6 (h) x 249.4(v) mm pixel format 1366 (h) x 768 (v)  1pixel = r + g + b dot  pixel pixel pitch 0.324(h) x 0.324 (v) mm pixel configuration r, g, b vertical stripe display mode normally black unit outline dimensions (*1) 472.0(w) x 275.0(h) x 38.0(d) mm mass 2.8 ? 0.2 kg surface treatment anti glare coating hard coating: 2h haze: 23 +/- 5% (*1) outline dimensions are shown in fig.1 www..net www..net
ld-17x11-2 4. input terminals 4-1. tft panel driving cn1 (interface signals and +12v dc power supply) (shown in fig.1) using connector  fi-x30ssl-hf (japan aviation electronics ind. , ltd.) mating connector  fi-x30hl,fi-x30hl-t, fi-x30c2l-npb, fi-x30c2l-t-npb,fi-x30m (japan aviation electronics ind. , ltd.) mating lvds transmitter  thc63lvdm83r or equivalent device pin no. symbol function remark 1 vcc +12v ? power supply 2 vcc +12v ? power supply 3 vcc +12v ? power supply 4 vcc +12v ? power supply 5 gnd gnd 6 gnd gnd 7 gnd gnd 8 gnd gnd 9 sellvds select lvds data order 2 note 1 3 pull up default ? h:3.3v 2 note 3 3 10 nc nc 11 gnd gnd 12 rin0- negative (-) lvds differential data input lvds 13 rin0+ positive (+) lvds differential data input lvds 14 gnd gnd 15 rin1- negative (-) lvds differential data input lvds 16 rin1+ positive (+) lvds differential data input lvds 17 gnd gnd 18 rin2- negative (-) lvds differential data input lvds 19 rin2+ positive (+) lvds differential data input lvds 20 gnd gnd 21 clkin- clock signal(-) lvds 22 clkin+ clock signal(+) lvds 23 gnd gnd 24 rin3- negative (-) lvds differential data input lvds 25 rin3+ positive (+) lvds differential data input lvds 26 gnd gnd 27 r/l horizontal shift direction ?y note 2 ?z?y note 4 ?z 28 u/d vertical shift direction ?y note 2 ?z?y note 4 ?z 29 gnd 30 nc ? 2 note 3 gnd of a liquid crystal panel drive part has connected with a module chassis. www..net www..net
ld-17x11-3 2 note1 3 sellvds ?? na: not available (*) since the display position is prescribed by the rise of de (display enable) signal, please do not fix de signal during operation at "high." ~ interface block diagram corresponding transmitter: thc63lvdm83r (thine) r0 ?` r7 b0 ?` b7 enab g0 ?` g7 8 8 8 controller ttl ?a lv d s pll lvds ?a ttl pll rx1clkin+(22) 8 8 8 r0 ?` r7 b0 ?` b7 enab g0 ?` g7 internal circuits ck clk ?i )+ side ?j (tft - lcd side) rx1clkin-(21) rx1in0+(13) rx1in0-(12) rx1in1+(16) rx1in1-(15) rx1in2+(19) rx1in2-(18) rx1in3+(25) rx1in3-(24) transmitter sellvds pin no data =l(gnd) =h(3.3v) or open 51 ta0 r0(lsb) r2 52 ta1 r1 r3 54 ta2 r2 r4 55 ta3 r3 r5 56 ta4 r4 r6 3 ta5 r5 r7(msb) 4 ta6 g0(lsb) g2 6 tb0 g1 g3 7 tb1 g2 g4 11 tb2 g3 g5 12 tb3 g4 g6 14 tb4 g5 g7(msb) 15 tb5 b0(lsb) b2 19 tb6 b1 b3 20 tc0 b2 b4 22 tc1 b3 b5 23 tc2 b4 b6 24 tc3 b5 b7(msb) 27 tc4 na na 28 tc5 na na 30 tc6 de(*) de(*) 50 td0 r6 r0(lsb) 2 td1 r7(msb) r1 8 td2 g6 g0(lsb) 10 td3 g7(msb) g1 16 td4 b6 b0(lsb) 18 td5 b7(msb) b1 25 td6 na na www..net www..net
ld-17901-4 ~ block diagram (lcd module) input signals clkin+ clkin- rin0+ rin0- rin1+ rin1- rin2+ rin2- rin3+ rin3- r/l u/d sellvds power supply +12v dc back light(cc back light ( ccft?~5 ) lcd panel 1366?~3(rgb)?~768 source driver gate driver control pwb control signals cn1 power supply circuit inverter cn2 input signals von v brt-a v brt-b power supply +24v dc o/s control signals frame o/s set test temp3 temp2 temp1 cn3 www..net www..net
ld-17901-5 sellvds= high (3.3v) or open ? ? ckain+ ckain- rin0+ rin0- rin1+ rin1- rin2+ rin2- rin3+ rin3 sellvds= low(gnd) ckin+ ckin- rin0+ rin0- rin1+ rin1- rin2+ rin2- rin3+ rin3- de: display enable na: not available (fixed low) ? g0 r5 r4 r3 r2 r1 r0 r0 r1 g0 b1 b0 g5 g4 g3 g2 g1 g1 g2 b1 de b5 b4 b3 b2 b2 b3 de na na b7 b6 g7 g6 r7 r6 r6 r7 na na 1 cycle g2 r7 r6 r5 r4 r3 r2 r2 r3 g2 b3 b2 g7 g6 g5 g4 g3 g3 g4 b3 de b7 b6 b5 b4 b4 b5 de na na b1 b0 g1 g0 r1 r0 r0 r1 na na 1 cycle www..net www..net
ld-17901-6 2 note 2 3 display reversal function normal (default) ???? horizontal reverse image ? r/l : l  gnd  u/d: l  gnd  r/l : h  3.3v  u/d : l  gnd  vertical reverse image horizontal and vertical reverse image ? r/l : l  gnd  u/d : h  3.3v  ? r/l : h  3.3v  u/d : h  3.3v  2 note 3 3 the equivalent circuit figure of the terminal 2 note 4 3 the equivalent circuit figure of the terminal # # # # 3.3v terminal 1.0k?? min : 16.5k?? typ : 60k?? max : 330k?? terminal 1.0k?? min : 16.5k?? typ : 47k?? max : 330k?? www..net www..net
ld-17901-7 ? cn3 (o/s control) (shown fig 1) o/s driving pin no and function using connector ? : sm07b-srss-tb-a (jst) mating connector : shr-07v-s or shr-07v-s-b  jst  pin no. symbol function default 1 frame frame frequency setting ?? h:60hz, l:50hz pull up ? 3.3v 2 note 2 3 2 o/s set o/s operation setting h:o/s_on, l:o/s_off pull up ? 3.3v 2 note 2 3 3 test not available pull down ? 0v : (gnd) 4 temp3 data3 of panel surface temperature pull up ? 3.3v 2 note 2 3 5 temp2 data2 of panel surface temperature pull up ? 3.3v 2 note 2 3 6 temp1 data1 of panel surface temperature pull up ? 3.3v 2 note 2 3 7 gnd gnd *l: low level voltage (gnd) h: high level voltage(3.3v) 2 note 1 3 in case of o/s set setting ?l?(o/s_off), it should be set the temp1~3 to ?l?. 2 note 2 3 the equivalent circuit figure of the terminal according as the surface temperature of the panel, enter the optimum 3 bit signal into pin no.4,5,6. measuring the correlation between detected temperat ure by the sensor on pwb in users side and actual surface temperature of panel at center, conv ert the temperature detected by the sensor to the surface temperature of panel to enter the 3 bit temperature data. surface temperature of panel pin no. 0-5 ? 5-10 ? 10-15 ? 15-20 ? 20-25 ? 25-30 ? 30-35 ? 35 ? and above 4 l l l l h h h h 5 l l h h l l h h 6 l h l h l h l h *l: low level voltage (gnd) h: high level voltage(3.3v) *for overlapping temperatures (such as 5 ? ,10 ? ,15 ? ,20 ? ,25 ? , 30 ? ,35 ? ) select the optimum parameter, judging from the actual picture image. 3.3v 47k?? terminal 510?? min : 16.5k?? typ : 47k?? max : 330k?? min 16.5k 
typ 47k 
max 330k 
5.1k 
www..net www..net
ld-17901-8 4-2. backlight driving cn2 (inverter control) using connector: s14b-pha-sm-tb (jst) mating connector: phr-14 (jst) ?? pin no. symbol function note remark 1 2 3 4 5 v bl power supply +24v power supply +24v 6 7 8 9 10 gnd power gnd 11 v brt-a analog-dimming ?y note2 ?z 12 v on inv. on/off control ?y note1 ?z 13 v brt-b pwm dimming ?y note3 ?z 14 ?m?b no connection (*gnd of an inverter board is not connected to gnd of liquid crystal panel drive part 2 note 1 3 inverter on/off input voltage(v) function min. typ. max on 2.0 3.3 3.6 off 0 - 0.8 2 note 2 3 brightness control (analog dimming) ???? analog dimming is regulated by analog input voltage. symbol min. (dark) typ. max (bright) input voltage v 0 - 3.3 luminance % 50 100 ?y note3 ?z brightness control (pwm dimming) pwm brightness control is regulated by pwm input pulse. symbol min. typ. max duty on voltage v 2.0 3.3 3.6 duty off voltage v 0 - 0.8 dimming ton/t 30 100 ? pwm frequency(1/t)  20010hz www..net www..net
ld-17901-9 4-3. the back light system characteristics the back light system is direct type with 5 ccfts (cold cathode fluorescent tube). the characteristics of the lamp ar e shown in the following table. the value mentioned below is at the case of one ccft. item dimming symbol min. typ. max. unit remarks life time 100% t l100 50000 - - hour 2 note 3 life time 60% t l60 60000 - - hour 2 note 3 2 note 3 ~ lamp life time is defined as the time when brightness becomes 50% of the original value in the continuous operation under the condition of ta=25 ? and brightness control(v brt-a =3.3v). ? ~ above value is applicable when the long side of lcd module is placed horizontally (landscape position). (lamp lifetime may vary if lcd module is in portrait position due to the change of mercury density inside the lamp.) 5. absolute maximum ratings parameter symbol condition ratings unit remark input voltage (for control) v i ta=25 ? -0.3 ~ 5.0 v 2 note 1 3 12v supply voltage (for control) vcc ta=25 ? 0 ~ + 14.0 v input voltage (for inverter) v brt-a v brt-b v on ta=25 ? 0 ~ + 5.0 v 24v supply voltage (for inverter) v bl ta=25 ? 0 ~ +27.0 v storage temperature tstg - -25 ~ +60 ? operation temperature (ambient) topa - 0 ~ +50 ? 2 note 2 3 2 note 1 3 sellvds, r/l, u/d,test, frame, o/s set, temp1, temp2, temp3 2 note 2 3 humidity 95%rh max.(ta ? 40 ? ) maximum wet-bulb temperature at 39 ? or less.(ta>40 ? ) no condensation. www..net www..net
ld-17901-10 6. electrical characteristics 6-1. control circuit driving ta=25 ? parameter symbol min. typ. max. uniit remark supply voltage vcc +11.4 +12.0 +12.6 v 2 note 1 3 +12v supply voltage current dissipation icc - 300 400 ma 2 note 2 3 permissible input ripple voltage v rp - - 100 mv p-p vcc = +12.0v high v th - - 100 mv differential input threshold voltage low v tl -100 - - mv v cm = +1.2v 2 note 8 3 input low voltage v il - - 0.7 v input high voltage v ih 2.6 3.3 3.6 v 2 note 3 3 i il1 - - 100 a v i = 0v 2 note 4 3 input leak current (low) i il2 - - 400 a v i = 0v 2 note 5 3 i ih1 - - 100 a v i =3.3v 2 note 6 3 input leak current (high) i ih2 - - 400 a v i =3.3v 2 note 7 3 terminal resistor r t - 100 - 
differential input 2 note 3 v cm : common mode voltage of lvds driver. 2 note 1 3 input voltage sequences dip conditions for supply voltage 0 < t1 ? 20ms a) 6.5v ? vcc < 10.8v 0 < t2 ? 20ms td ? 10ms 0 < t3 ? 1s b) vcc < 6.5v 0 < t4 ? 1s dip conditions for supply voltage is t5 ? 200ms based on input voltage sequence. t6 ? 0 t7 ? 300ms td v1 v2 vcc ? v1:10.8v v2:6.5v 0.9vcc back light:v b l data2 vcc t4 t7 t1 0.1vcc 0.1vcc 0.9vcc 0.1vcc t3 off on off data1 t2 t5 t6 t3 t?  ata1:clkin ? ,rin0 ? ,rin1 ? , rin2 ? , rin3 ? t?  ata2:r/l,u/d,sellvds,frame,o/sset,temp1,2,3 t? about the relation between data input and back light lighting, please base on the above-mentioned input sequence. . when back light is switched on before panel operation or after a panel operation stop, it may not display normally. but this phenomenon is not based on change of an incoming signal, and does not give damage to a liquid crystal display. www..net www..net
ld-17901-11 2 note 2 3 typical current situation: 256 gr ay-bar pattern (vcc = +12.0v) the explanation of rg b gray scale is seen in section 8. vcc 1 12.0v ?? ck 1 82.0mhz ?? th 1 20.67  s 2 note 3 3 r/l, u/d, sellvds, test, frame, o/s set, temp1, temp2, temp3 2 note 4 3 r/l, u/d, test, frame, o/s set, temp1, temp2, temp3 2 note 5 3 sellvds 2 note 6 3 r/l, u/d, test, frame, o/s set, temp1, temp2, temp3 2 note 7 3 sellvds 2 note 8 3 ckin+/ckin-, rin0+/rin0-, rin1+/ri n1-, rin2+/rin2-, rin3+/rin3-,  ? ? ?  ? ? ??  ? ? ?  ? ? ? ?  ? ?  ? ???? ? www..net www..net
ld-17901-12 6-2. inverter driving for back light ????? the back light system is direct type with 5 ccfts (cold cathode fluorescent tube). ta=25 ? parameter symbol min. typ. max. unit remark current dissipation i bl - 1.9 2.2 ? a electricity consumption w bl - 45 - w v bl = 24v v brt-a,-b,on = 3.3v, 2 note 1 3  24v supply voltage v bl 22.5 24.0 25.5 v 2 note 2 3 permissible input ripple voltage v rf - - 500 mv p-p v bl = +24v input voltage (low) v onl 0 - 0.8 v input voltage (high) v onh 2.0 2.5 3.3 v brightness control voltage v brt-a 0 - 3.3 v driving frequency f bl 57 59 61 khz d brt-b 30 - 100 % v brt-b on 2.0 2.5 3.3 v v brt-b off 0 - 0.8 v brightness control (pwm) f brt-b 190 200 210 hz 2 note 1 3 i bl : the current value of less than 1 hour after switching on the light. (inrush current is not included.) 2 note 2 3 1) v bl -turn-on condition v on v bl 0.9v bl 100 s ? t1 ? 300ms t2 ? 1 s 0v t1 t2 0.1v bl 0.1v on 2) v inv -turn-off condition 0.9v bl v on v bl t1 t1 ? 1ms 0.8v 0v 0v 6-3. inverter driving for back light :protective circuit ????? name mode function over supply voltage protective circuit ? supply voltage ? 28.0v(typ.) shut down (automatic comeback at normal voltage) connector open protective circuit ??? opened output connector ? 1 pin shut down(within 4 second) *v brt-a and v brt-b needs before v on . *v brt-a ,v brt-b is free. www..net www..net
ld-17901-13 7. timing characteristics of input signals 7-1. timing characteristics timing diagrams of input signal are shown in fig.2 parameter symbol min. typ. max. unit remark clock frequency 1/tc 65 82 85 mhz 1560 1696 1940 clock horizontal period th 18.36 20.67 - s horizontal period (high) thd 1366 1366 1366 clock vertical period tv 778 806 972 line data enable signal vertical period (high) tvd 768 768 768 line 2 note 3 when vertical period is very long, flicker and etc. may occur. please turn off the module after it shows the black screen. please make sure that length of vertical period should become of an integral multiple of horizontal length of period. otherwise, the screen may not display properly. ? ? ?   ? ?  ? ? e? ? ? ? ? ? ? ?   ? ? ? ? ? ? fig.2 timing characteristics of input signals ? 1 2 1366 thd th tvd tv tc 1 2 768 767 1366 www..net www..net
ld-17901-14 7-2. input data signal and display position on the screen  ~  ~  ~ ? ~ ? ~ ? ~ ty?k? ?k?yy ty?k?yy r1 g1 b1 r2 g2 b2 ? j e ? e  0:73(@?6:0;065?6-? (;(??e r g b www..net www..net
ld-17901-15 8. input signal, basic display colo rs and gray scale of each color data signal r0 r1 r2 r3 r4 r5 r6 r7 g0 g1 g2 g3 g4 g5 g6 g7 b0 b1 b2 b3 b4 b5 b6 b7 colors & gray scale gray scale black  0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue  0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 green  0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 cyan  0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red  1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 magenta  1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 yellow  1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 basic color white  1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 darker gs2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? brighter gs253 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? gs254 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gray scale of red red gs255 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 darker gs2 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? brighter gs253 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 ? gs254 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 gray scale of green green gs255 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 darker gs2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 ? brighter gs253 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 ? gs254 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 gray scale of blue blue gs255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 : low level voltage, 1 : high level voltage. each basic color can be displayed in 256 gray scales from 8 bit data signals. according to the combination of total 24 bit data signals, the 16-million-color display can be achieved on the screen. www..net www..net
ld-17901-16 9. optical characteristics ????? ta=25 ? , vcc = +12v, v inv = +24v parameter symbol condition min. typ. max. unit remark horizontal  21  22 70 88 - deg. viewing angle range vertical  11  12 cr ? 10 70 88 - deg. 2 note1,4 3 contrast ratio cr  =0 deg. 900 1200 - 2 note2,4 3 v brt =0v r - 8 - response time d  =0 deg. - 8 - ms 2 note3-2,4,5 3 v brt-a =3.3v x 0.248 0.278 0.308 - chromaticity of white y  =0 deg. 0.255 0.285 0.315 - x 0.610 0.640 0.670 - chromaticity of red y  =0 deg. 0.300 0.330 0.360 - x 0.250 0.280 0.310 - chromaticity of green y  =0 deg. 0.570 0.600 0.630 - x 0.120 0.150 0.180 - chromaticity of blue y  =0 deg. 0.030 0.060 0.090 - 2 note 4 3 v brt-a =3.3v luminance of white y l1  =0 deg. 400 500 - cd/m 2 2 note 4 3 v brt-a =3.3v luminance uniformity  ,  =0 deg. - - 1.25 2 note 6 3 measurement condition : set the value of v brt to maximum luminance of white. *the measurement shall be executed 60 minutes after lighting at rating. 2 note 3 the optical characteristics are measur ed using the following equipment. middle of the screen ( 1 0 ? ) tft-lcd module middle of the screen ( 1 0 ? ) tft-lcd module 400mm field=1 ? detector  sr-3, photo diode  detector  ez-contrast  fig.3-1 measurement of viewing angle range. fig.3-2 measurement of contrast and luminance and chromaticity and response time. (contrast, luminance and chromaticity: sr-3, response time: photo diode). www..net www..net
ld-17901-17 2 note 1 3 definitions of viewing angle range : 2 note 2 3 definition of contrast ratio : the contrast ratio is defined as the following. 2 note 3 3 definition of response time response time the response time ( d and r ) is defined as the following figure and shall be measured by switching the input signal for ?five luminance ratio ( 0%, 25%, 50%, 75%, 100% )? and ?any five luminance ratio ( 0%, 25%, 50%, 75% , 100% )?. 0% 25% 50% 75% 100% 0% tr:0%-25% tr:0%-50% tr:0%-75% tr:0%-100% 25% td:25%-0% tr:25%-50% tr:25%-75% tr:25%-100% 50% td:50%-0% td:50%-25% tr:50%-75% tr:50%-100% 75% td:75%-0% td:75%-25% td:75%-50% tr:75%-100% 100% td:100%-0% td:100%-25% td:100%-50% td:0%-75% t*:x-y...response time from level of gray(x) to level of gray(y) r = (tr:x-y)/36 , d = (td:x-y)/36 ? 2 note 4 3 this shall be measured at center of the screen. 2 note 5 3 ?response time? is the value when o/s driv ing is used at typical input time value . 2 note 6 3 definition of white uniformity ; white uniformity is defined as the following with five measurements. (a ? e) a b c d e 192 384 576 pixel ? pixel ? 342 ? 683 ? 1025 ? maximum luminance of five points (brightness )  , 1 minimum luminance of five points (brightness) luminance (brightness) with all pixels white contrast ratio 1 luminance (brightness) with all pixels black normal line  21  11  12  22 6 o?clock direction www..net www..net
ld-17901-18 10. display quality the display quality of the color tft-lcd module shall be compliance with the incoming inspection standard 11. handling precautions of the module a) be sure to turn off the power supply when inserting or disconnecting the cable. b) this product is using the parts (inverter, ccft etc), which generate the high voltage. therefore, during operating, please don't touch these parts. c) brightness control voltage is switched for ?on? and ?off?, as shown in fig.4. voltage difference generated by this switching, ? v bl, may affect a sound output, etc. when th e power supply is shared between the inverter and its surrounding circuit. so, separate the power supply of the inverter circuit with the one of its surrounding circuit. fig.4 brightness control voltage. *since inverter board?s gnd is not connected to the frame of the lcd module, please connect it with the customer?s gnd of inverter power supply. d) be sure to design the cabinet so that the module can be installed without any extra stress such as warp or twist. e) screw on a mounting hole in the module side surely. f) since the front polarizer is easily damaged, pay attention not to scratch it. g) since long contact with water may cause discoloration or spots, wipe off water drop immediately. h) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. i) since the panel is made of glass, it may break or crac k if dropped or bumped on hard surface. handle with care. j) since cmos lsi is used in this module, take care of static electricity and take the human earth into consideration when handling. k) the module has some printed circuit boards (pcbs) on the back side, take care to keep them form any stress or pressure when handling or installing the module; otherwise some of electronic parts on the pcbs may be damaged. l) observe all other precautionary requirements in handling components. m) when some pressure is added onto the module from rear side constantly, it causes display non-uniformity issue, functional defect, etc.. so, please avoid such design. www..net www..net
ld-17901-19 n) when giving a touch to the panel at power on supply, it may cause some kinds of degradation. in that case, once turn off the power supply, and turn on after several seconds again, and that is disappear. o) when handling lcd modules and assembling them into cabinets, please be noted that long-term storage in the environment of oxidization or deoxidization gas and the use of such materials as reagent, solvent, adhesive, resin, etc. which generate these gasses, may cause corrosion and discoloration of the lcd ? modules. 12. packing form a) piling number of cartons: 4 maximum b) packing quantity in one carton: 10pcs. c) carton size: 706(w)  548 (h)  356 (d) d) total mass of one carton filled with full modules: 33kg ? max  13. reliability test item no. test item condition 1 high temperature storage test ta=60 ?? ? 240h 2 low temperature storage test ta=-25 ?? ? 240h 3 high temperature and high humidity operation test ta=40 ? ; 95%rh ?? 240h (no condensation) 4 high temperature operation test ta=50 ?? ? 240h 5 low temperature operation test ta=0 ?? 240h 6 vibration test (non-operation) frequency: 10~57hz/vibration width (one side): 0.075mm : 58~500hz/acceleration: 9.8 m/s2 sweep time: 11 minutes test period: 3 hours (1h for each direction of x, y, z) 7 shock test (non-operation) maximum acceleration: 490m/s 2 pulse width: 11ms, sinusoidal half wave direction: +/-x, +/-y, +/-z , once for each direction. 8 esd * at the following conditions, it is a thing without incorrect operation and destruction. ? (1)non-operation: contact electric discharge ? 10kv non-contact electric discharge ? 20kv (2)operation ? contact electric discharge ? 8kv non-contact electric discharge ? 15kv conditions: 150pf z 330ohm ? 2 result evaluation criteria 3 under the display quality test condition with normal operation state, there shall be no change, which may affect practical display function. www..net www..net
ld-17901-20 14. others 1)lot no. label ; the label that displays sharp, product model (LQ200T3LZ18), a product number and ?made in japan? is stuck on the back of the module.      ? !??? t?? ?   ??? 6+,3?6? ? 6;?6? ?  (9*6+, ? ? ? 2) packing label ? management no. (LQ200T3LZ18) ? lot no. (date) ? quantity ? 3) adjusting volume have been set optimally before shipment, so do not change any adjusted value. if adjusted value is changed, the specification may not be satisfied. 4) disassembling the module can cause permanent damage and should be strictly avoided. 5) please be careful since image retention may occur when a fixed pattern is displayed for a long time. 6) the chemical compound, which causes the destruction of ozone layer, is not being used. 7) cold cathode fluorescent lamp in lcd panel contains a small amount of mercury. please follow local ordinances or regulations for disposal. ? ? ? 8) when any question or issue occurs, it shall be solved by mutual discussion. a production year(the last figures of the christian era) a production month (1-9, x,y, z) serial no. management no. how to express lot no.   ?      t o ? j ( LQ200T3LZ18 ??e !>c#$} ??   )  ?????????e &d0=c8ch & ? ? ? ?2b???e a?2 ? j ???  bar code bar code bar code 3?? v;???pb{ www..net www..net
ld-17901-21 15. carton storage condition temperature 0 ? to 40 ? humidity 95%rh or less reference condition : 20 ? to 35 ? , 85%rh or less (summer) : 5 ? to 15 ? , 85%rh or less (winter) ~ the total storage time (40 ? ,95%rh) : 240h or less sunlight be sure to shelter a product from the direct sunlight. atmosphere harmful gas, such as acid and alkali which bites electronic components and/or wires must not be detected. notes be sure to put cartons on palette or base, don?t put it on floor, and store them with removing from wall please take care of ventilation in storehouse and around cartons, and control changing temperature is within limits of natural environment storage life 1 year www..net www..net
www..net www..net
www..net www..net


▲Up To Search▲   

 
Price & Availability of LQ200T3LZ18

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X